Exterior Mirror Control Switch
Remove exterior mirror control switch. Using an ohmmeter, check for continuity between indicated switch terminals with switch in appropriate position. See EXTERIOR MIRROR CONTROL SWITCH TESTING table. See Fig 1 . Replace exterior mirror control switch if it does not test as specified.
EXTERIOR MIRROR CONTROL SWITCH TESTING
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 3 & 9; 4 & 7 | |
| Down | 3 & 4; 7 & 9 | |
| Left | 1 & 3; 4 & 7 | |
| Right | 1 & 7; 3 & 4 | |
| Right Mirror | ||
| Up | 3 & 8; 4 & 7 | |
| Down | 3 & 4; 7 & 8 | |
| Left | 2 & 3; 4 & 7 | |
| Right | 2 & 7; 3 & 4 | |