DTC C1233: Left Front Sensor Input Signal Missing
- Check left front sensor mounting. Check sensor for damage or excessive dirt build-up. Check for metal obstructions. If sensor and sensor mounting are okay, go to next step. If sensor or sensor mounting is faulty, repair or replace left front sensor.
- Check left front toothed sensor indicator ring for corrosion, nicks, damaged or bridged teeth, proper mounting, and alignment with left front sensor. Check air gap and bearing endplay. If sensor indicator ring is okay, go to next step. If sensor indicator ring is faulty, replace left front toothed sensor indicator ring.
- Turn ignition on. Using NGS tester, clear DTCs. Turn ignition off, and then on. Using NGS tester, monitor ABS control module Parameter Identification (PID) LF_WSPD and RF_WSPD while driving at various speeds. Test drive vehicle for 10 miles. If PID readings are always about the same, replace ABS control module. If PID readings are not about the same, replace left front sensor.