Driver Seat Control Switch (Without Memory) & Passenger Seat Control Switch
Remove seat control switch. Check resistance between terminals with seat control switch in appropriate position. Refer to the SEAT CONTROL SWITCH RESISTANCE table. See Fig 1 or Fig 2 . If resistances are not as specified, replace seat control switch.
SEAT CONTROL SWITCH RESISTANCE
| Switch Position | Terminals No. | Resistance: Ohms |
|---|---|---|
| Neutral | 1 & All Except 3 | Less Than 5 |
| Front Up | 3 & 7 | Less Than 5 |
| Front Down | 3 & 5 | Less Than 5 |
| Rear Up | 3 & 4 | Less Than 5 |
| Rear Down | 3 & 6 | Less Than 5 |
| Seat FWD | 2 & 3 | Less Than 5 |
| Seat RWD | 3 & 8 | Less Than 5 |