Power Seat Switch
Power seat switch is located in door panel or armrest. Using an ohmmeter, check for continuity between switch connector terminals indicated when switch is activated as specified. See Fig 1 . Refer to the POWER SEAT SWITCH CONTINUITY table. Replace switch if it does not test as specified.
POWER SEAT SWITCH CONTINUITY
| Switch Position | Continuity | |||
|---|---|---|---|---|
| Neutral | (1) 1, 2, 4, 5, 6, 7 & 8 | |||
| 4-Way Knob | ||||
| Forward | 2 & 3 | |||
| Backward | 3 & 8 | |||
| Up | 3, 4 & 6 | |||
| Down | 3, 5 & 7 | |||
| Front Tilt | ||||
| Up | 3 & 4 | |||
| Down | 3 & 5 | |||
| Rear Tilt | ||||
| Up | 3 & 6 | |||
| Down | 3 & 7 | |||
|
||||