LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1992 >> Town Car Signature >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Testing >> Ignition Key Lock Cylinder Sensor

Ignition Key Lock Cylinder Sensor

  1. System is disarmed. Disconnect battery ground cable. Wait 10 seconds and reconnect battery cable. If alarm triggers 8 seconds after reconnecting battery ground cable, go to step 4. If alarm remains silent, go to step 2.
  2. With ignition off, disconnect ignition key lock cylinder sensor from wiring harness. If alarm triggers, system is ok. Reconnect sensor and stop. If alarm does not trigger, go to step 3.
  3. Check continuity between pin 23 and pin 26 at control module. If continuity exists, go to step 4. If there is no continuity check circuit 57 (Black wire) and retest system.
  4. Disconnect control module and measure resistance between Pin 10 and Pin 26. If resistance measures between 145 ohms and 175 ohms, replace control module and retest system. If resistance measures less than 145 ohms or greater than 175 ohms, check ignition key lock cylinder sensor and/or check circuit 936 (Dark Green/White) wire. Retest system.