Removal [10/2020 - 10/2022]: Procedure
- PRECAUTION NOTE:
After turning the engine switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Refer to REMOVAL [10/2020 - 10/2022]
- REMOVE HEADLIGHT ASSEMBLY LH
Refer to REMOVAL [10/2020 - 10/2023]
- REMOVE FRONT ACTIVE STABILIZER CONTROL ECU
- Disconnect the 2 wire harness clamps.
- Disconnect the front active stabilizer control actuator connector labeled A.
- Disconnect the front active stabilizer control actuator connector labeled B.
- Release the lever's lock. (*1)
- Press the claw and move the lever in the direction of the arrow in the illustration. (*2)
- Disconnect the front active stabilizer control actuator connector. (*3)NOTE:
When disconnecting the actuator connector, do not apply excessive force to the wire harness.
- Remove the bolt, 2 nuts and front active stabilizer control ECU.
- Disconnect the front active stabilizer control ECU connector.
- Release the lever's lock. (*1)
- Press the claw and move the lever in the direction of the arrow in the illustration. (*2)
- Disconnect the front active stabilizer control ECU connector. (*3)NOTE:
When disconnecting the ECU connector, do not apply excessive force to the wire harness.
- Disconnect the 2 wire harness clamps.