LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Convertible >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information (Convertible) >> Brake Control Power Supply >> Installation [05/2023 - ] >> Procedure

Installation [05/2023 - ]: Procedure

  1. INSTALL BRAKE CONTROL POWER SUPPLY WITH BRACKET ASSEMBLY 
    1. Install the brake control power supply with bracket assembly to the fuel pump control ECU bracket with the 2 nuts.

      Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf) 

      GTY804567Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL PUMP CONTROL ECU BRACKET 
    1. Install the fuel pump control ECU bracket to the vehicle body with the 2 bolts and nut.
      GTY821662Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf) 

    2. Attach the clamp.
      GTY833716Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the 2 fuel pump control ECU connectors.
      GTY833717Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the brake control power supply connector.
  3. INSTALL NO. 1 DECK BOARD BRACKET LH 
    1. Install the No. 1 deck board bracket LH with the bolt and nut.
      GTY804583Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 15.75 N.m (161 kgf/cm, 12 ft.lbf) 

  4. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER 

    Refer to REASSEMBLY [05/2023 - ]

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Refer to INSTALLATION [05/2023 - ]

  6. CHECK AND CLEAR DTC 

    Refer to DTC CHECK / CLEAR [07/2020 - ]

  7. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL 

    HINT: 

    When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

    Refer to AUTOMATIC LEARNING CHART [05/2023 - ]