Disassembly [10/2014 - ]: Procedure
- REMOVE NO. 1 FUEL SUB-TANK
- Disconnect the fuel pump harness connector.
- Using needle nose pliers, remove the fuel tank pipe setting holder.
HINT:
Slightly lower the fuel suction plate sub-assembly to remove the fuel tank pipe setting holder.
*1 Fuel Suction Plate Sub-assembly *2 Fuel Tank Pipe Setting Holder Lower - Remove the No. 2 fuel tank cushion and No. 3 fuel tank cushion from the fuel suction plate sub-assembly.
- Using a screwdriver with its tip wrapped with protective tape, detach the 2 claws and remove the fuel filter assembly from the No. 1 fuel sub-tank.
- Detach the claw of the jet pump nozzle.
- Using a screwdriver with protective tape wrapped around it, remove the jet pump from the No. 1 fuel sub-tank.
*1 Jet Pump *a Protective Tape HINT:
Tape the screwdriver tip before use.
- Remove the O-ring from the jet pump.
*1 Jet Pump *2 O-Ring
- Disconnect the fuel pump harness connector.
- REMOVE NO. 1 FUEL SUCTION SUPPORT
- REMOVE FUEL PUMP ASSEMBLY WITH FILTER
- Using a screwdriver with its tip wrapped with protective tape, detach the 5 claws and remove the fuel filter assembly from the fuel pump assembly with filter.
*1 Fuel Main Tube NOTE:When detaching the claws, do not disconnect the fuel main tube.
- Disconnect the fuel pump harness connector.
- Remove the O-ring from the fuel pump.
*1 O-Ring *2 Fuel Pump Spacer - Remove the fuel pump spacer from the fuel pump.
- Using a screwdriver with its tip wrapped with protective tape, detach the 5 claws and remove the fuel filter assembly from the fuel pump assembly with filter.