LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> NX 300h Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Information) >> Fuel Injector >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. DISCONNECT INTAKE MANIFOLD 

    Refer to REMOVAL [10/2014 - 09/2015] Refer to REMOVAL [09/2015 - 05/2019] Refer to REMOVAL [05/2019 - ]

  2. DISCONNECT FUEL TUBE SUB-ASSEMBLY 
    1. Remove the No. 1 fuel pipe clamp from the fuel tube sub-assembly.

      Refer to PRECAUTION [10/2014 - 05/2019] Refer to PRECAUTION [05/2019 - ]

    2. Disconnect the fuel tube sub-assembly from the fuel pipe.

      Refer to PRECAUTION [10/2014 - 05/2019] Refer to PRECAUTION [05/2019 - ]

      GTY515473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FUEL DELIVERY PIPE 
    1. Disconnect the 4 fuel injector assembly connectors.
      GTY362256Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts, and then remove the fuel delivery pipe together with the 4 fuel injector assemblies.
      NOTE:

      Be careful not to drop the fuel injector assemblies when removing the fuel delivery pipe.

    3. Remove the 2 fuel delivery pipe spacers from the cylinder head.
      GTY513995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE INJECTOR VIBRATION INSULATOR 
    1. Remove the 4 injector vibration insulators from the cylinder head.
      GTY513993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FUEL INJECTOR ASSEMBLY 
    1. Pull the 4 fuel injector assemblies out of the fuel delivery pipe.
      GTY503787Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the O-ring from each fuel injector assembly.
      NOTE:

      When reinstalling the fuel injector assemblies, mark the cylinder number on the label, etc. and store them in plastic bags to prevent entry of foreign matter.