LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> GS 350 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information >> Brake Actuator >> Reassembly [10/2015 - ] >> Procedure

Reassembly [10/2015 - ]: Procedure

  1. INSTALL BRAKE ACTUATOR BOLT CUSHION 
    1. Install the 3 brake actuator bolt cushions to the brake actuator bracket assembly.
  2. INSTALL BRAKE ACTUATOR CASE COLLAR 
    1. Install the 3 brake actuator case collars to the brake actuator bolt cushions.
      NOTE:

      Make sure the collars are in full contact with the cushions.

  3. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY 
    1. Temporarily install the brake actuator bracket assembly to the brake actuator with the 3 bolts.
      GTY647741Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Do not remove the hole plugs of a new brake actuator before connecting the 6 brake lines because the brake actuator is filled withbrake fluid.
      • Do not hold the actuator by the connector.
      • If the actuator is dropped, replace it.
    2. Tighten the 3 bolts in the order shown in theillustration.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)