LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 Base >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - Service Information >> Transfer Wire >> Installation [04/2013 - ] >> Procedure

Installation [04/2013 - ]: Procedure

  1. INSTALL TRANSFER TRANSMISSION WIRE 
    1. Coat the transfer transmission wire O-ring with ATF.
      GTY462022Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Transfer Transmission Wire O-ring
      Coat with Toyota Genuine ATF WS

      ATF

      Toyota Genuine ATF WS

    2. Install the transfer transmission wire with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    3. Connect the connector to the transfer control solenoid assembly.
  2. INSTALL TRANSFER CONTROL VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [04/2013 - 08/2015] , or refer to INSTALLATION [08/2015 - ] 

  3. ADD AUTOMATIC TRANSMISSION FLUID 

    Refer to PROCEDURE - Step 6

  4. INSPECT FOR EXHAUST GAS LEAK 

    Refer to PROCEDURE - Step 8 [04/2013 - 10/2017] , or refer to PROCEDURE - Step 12 [10/2017 - ]