LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> ES 300h >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Power Switch >> Removal [07/2015 - ] >> Procedure

Removal [07/2015 - ]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work. Refer to PRECAUTION [07/2015 - ] .

  2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 2

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [07/2015 - ] .

  4. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type) 

    Refer to REMOVAL [07/2015 - ]

  5. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type) 

    Refer to REMOVAL [07/2015 - ]

  6. REMOVE FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 4

  7. REMOVE COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 5

  8. REMOVE FRONT DOOR OPENING TRIM COVER LH 

    Refer to PROCEDURE - Step 6

  9. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 19

  10. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 20

  11. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 21

  12. REMOVE SWITCH BASE 

    Refer to PROCEDURE - Step 25

  13. REMOVE POWER SWITCH 
    1. Disengage the 2 claws and remove the power switch.
      GTY413633Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002