HV Battery Cooling System Maintenance (L-SB-0028-20)
Publication date: 2020-08-04Reference number: L-SB-0028-20
HV BATTERY COOLING SYSTEM MAINTENANCE
TECHNICAL SERVICE BULLETIN
| LEXUS: | 2011 - 2017 CT200H; 2013 - 2020 ES300H; 2007 - 2011, 2013 - 2018 GS450H; 2010 - 2012 HS250H; 2018 - 2020 LC500H; 2008 - 2016, 2018 - 2020 LS500H, LS600H; 2015 - 2020 NX300H; 2006 - 2008, 2010 - 2020 RX400H, RX450H; 2019 - 2020 UX250H |
| SERVICE CATEGORY: | Engine/Hybrid System |
| SECTION: | Hybrid/Battery Control System |
| MARKET: | USA |
| COPYRIGHT: | © 2018 Lexus, a division of Toyota Motor Sales, USA License Agreement TMS1002 |
APPLICABILITY
| YEAR(S) | MODEL(S) | ADDITIONAL INFORMATION |
|---|---|---|
| 2011 - 2017 | CT200H | |
| 2013 - 2020 | ES300H | |
| 2007 - 2011, 2013 - 2018 | GS450H | |
| 2010 - 2012 | HS250H | |
| 2018 - 2020 | LC500H | |
| 2008 - 2016, 2018 - 2020 | LS500H, LS600H | |
| 2015 - 2020 | NX300H | |
| 2006 - 2008, 2010 - 2020 | RX400H, RX450H | |
| 2019 - 2020 | UX250H |
INTRODUCTION
Some 2006 - 2020 model year Lexus hybrid vehicles may exhibit an excessive buildup of dust, lint, or debris in the HV battery cooling fan or intake filter. This condition could reduce the efficiency of the HV battery cooling system. Perform the procedures in this bulletin to address this condition.
The procedures in this bulletin should be completed every 20, 000 miles OR anytime the battery assembly is replaced.
WARRANTY INFORMATION
| OP CODE | DESCRIPTION | TIME | OFP | T1 | T2 |
|---|---|---|---|---|---|
| N/A | Not Applicable to Warranty | - | - | - | - |
HV BATTERY INTAKE FILTER APPLICABILITY
The following table is a general guideline for HV battery cooling fan intake filter applicability. Some model and model year vehicles may NOT follow this table. ALWAYS check the vehicle and refer to the appropriate Repair Manual BEFORE beginning service.
| MODEL | MODEL YEAR | INTERNAL FILTER | EXTERNAL FILTER | ||||
|---|---|---|---|---|---|---|---|
| CT 200h | 2011 - 2014 | N | N(1) | ||||
| 2015 - 2017 | Y | ||||||
| ES 300h | 2013 | N | |||||
| 2014 - 2018 | Y | ||||||
| 2019 - 2020 | Y | ||||||
| GS 450h | 2007 - 2014 | N | |||||
| 2015 - 2018 | Y | ||||||
| HS 250h | 2010 - 2012 | N(2) | |||||
| LS 500h, LS 600h | 2008 - 2016 | N | |||||
| 2018 - 2020 | Y | ||||||
| LC 500h | 2018 - 2020 | Y | |||||
| NX 300h | 2015 - 2020 | Y | |||||
| RX 400h, RX 450h | 2006 - 2015 | N | |||||
| 2016 - 2020 | Y | ||||||
| UX 250h | 2019 - 2020 | Y | |||||
|
|||||||
PARTS INFORMATION
If the HV battery cooling fan intake filter is damaged or in need of replacement, use the following table as a general guideline.
| MODEL | MODEL YEAR | PART NUMBER | QTY |
|---|---|---|---|
| CT 200h | 2015 - 2017 | G92DH-76020 | 1 |
| ES 300h | 2014 - 2018 | G92DH-33040 | 1 |
| 2019 - 2020 | G92DH-33050 | 1 | |
| GS 450h | 2015 - 2018 | G92DH-30130 | 1 |
| G92DH-30140 | 1 | ||
| LS 500h | 2018 - 2020 | G92DH-50010 | 1 |
| G92DJ-50010 | 1 | ||
| LC 500h | 2018 - 2020 | G92DH-11010 | 1 |
| G92DJ-11010 | 1 | ||
| NX 300h | 2015 - 2020 | 58466-78040-C0 | 1 |
| 58467-78040-C0 | 1 | ||
| RX 450h | 2016 - 2020 | 74412-48030 | |
| 74412-48040 | 1 | ||
| UX 250h | 2019 - 2020 | G92DH-12050 | 1 |
HV BATTERY INTAKE FILTER MAINTENANCE AND CLEANING
- Determine if the vehicle has an HV battery intake filter by using Tables 1 and 2 above. Does the vehicle have an HV battery intake filter?
- YES - Continue to step 2.
- NO - Go to the HV Battery Cooling Fan Assembly Maintenance and Cleaning section.
- The HV battery intake filter may have accumulated dust, lint, and/or debris. Inspect, clean, and determine if the HV battery intake filter requires replacement.
Refer to TIS, applicable model and model year Repair Manual:
- 2015/2016/2017
CT 200h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Inspection"
- 2014/2015/2016/2017/2018/2019/2020
ES 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Inspection"
NOTE: The 2014 model year ES 300h Repair Manual does NOT specifically call out the Battery Cooling Filter. Use the 2015 model year ES 300h Repair Manual. - 2016/2017/2018/2019/2020
RX 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Inspection"
- 2019/2020
UX 250h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Inspection"
- 2015/2016/2017/2018/2019/2020
NX 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "2AR-FXE (Hybrid/Battery Control): Battery Cooling Filter: Inspection"
- 2015/2016/2017/2018
GS 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Duct(W/Filter): Inspection"
- 2018/2019/2020
LS 500h:
Engine/Hybrid System - Hybrid/Battery Control System - "8GR-FXS (Hybrid/Battery Control): Battery Cooling Filter: Inspection"
- 2018/2019/2020
LC 500h:
Engine/Hybrid System - Hybrid/Battery Control System - "8GR-FXS (Hybrid/Battery Control): Battery Cooling Filter: Inspection"
- 2015/2016/2017
CT 200h:
- Does the HV battery intake filter require replacement?NOTE: If the HV battery intake filter is damaged it MUST be replaced.
- YES - Continue to step 4.
- NO - Go to step 5.
- Replace the HV battery intake filter.
- Remove the HV battery intake filter.
Refer to TIS, applicable model and model year Repair Manual:
- 2015/2016/2017
CT 200h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Removal"
- 2014/2015/2016/2017/2018/2019/2020
ES 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Removal"
NOTE: The 2014 model year ES 300h Repair Manual does NOT specifically call out the Battery Cooling Filter. Use the 2015 model year ES 300h Repair Manual. - 2016/2017/2018/2019/2020
RX 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Removal"
- 2019/2020
UX 250h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Removal"
- 2015/2016/2017/2018/2019/2020
NX 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "2AR-FXE (Hybrid/Battery Control): Battery Cooling Filter: Removal"
- 2016/2017/2018
GS 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Duct(W/Filter): Removal"
- 2018/2019/2020
LS 500h:
Engine/Hybrid System - Hybrid/Battery Control System - "8GR-FXS (Hybrid/Battery Control): Battery Cooling Filter: Removal"
- 2018/2019/2020
LC 500h:
Engine/Hybrid System - Hybrid/Battery Control System - "8GR-FXS (Hybrid/Battery Control): Battery Cooling Filter: Removal"
- 2015/2016/2017
CT 200h:
- Install the NEW HV battery intake filter.
Refer to TIS, applicable model and model year Repair Manual:
- 2015/2016/2017
CT 200h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Installation"
- 2014/2015/2016/2017/2018/2019/2020
ES 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Installation"
NOTE: The 2014 model year ES 300h Repair Manual does NOT specifically call out the Battery Cooling Filter. Use the 2015 model year ES 300h Repair Manual. - 2016/2017/2018/2019/2020
RX 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Installation"
- 2019/2020
UX 250h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Filter: Installation"
- 2015/2016/2017/2018/2019/2020
NX 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "2AR-FXE (Hybrid/Battery Control): Battery Cooling Filter: Installation"
- 2016/2017/2018
GS 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Cooling Duct (W/Filter): Installation"
- 2018/2019/2020
LS 500h:
Engine/Hybrid System - Hybrid/Battery Control System - "8GR-FXS (Hybrid/Battery Control): Battery Cooling Filter: Installation"
- 2018/2019/2020
LC 500h:
Engine/Hybrid System - Hybrid/Battery Control System - "8GR-FXS (Hybrid/Battery Control): Battery Cooling Filter: Installation"
- 2015/2016/2017
CT 200h:
- Remove the HV battery intake filter.
- Verify normal vehicle operation.
Has the HV battery cooling system efficiency improved?
- YES - The procedure is complete. Repeat this cleaning procedure as regular maintenance every 20, 000 miles. If applicable, perform a filter inspection every 5, 000 miles.
- NO - This bulletin does NOT apply. Continue diagnosis using the applicable Repair Manual.
HV BATTERY COOLING FAN ASSEMBLY MAINTENANCE AND CLEANING
- Do NOT attempt to clean the HV battery cooling fan while it is installed, doing so may cause dust and debris to enter the battery case.
- Failure to secure the fan blades while cleaning the HV battery cooling fan assembly may result in electronic circuit failure due to overturning.
- Remove the HV battery cooling fan assembly.
Refer to TIS, applicable model and model year Repair Manual:
- 2011/2012/2013/2014
CT 200h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Removal"
- ES 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Removal"
- 2006/2007/2008
RX 400h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Removal"
- 2010/2011/2012/2013/2014/2015
RX 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Removal"
- 2007/2008/2009/2010/2011/2013/2014
GS 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Removal"
- 2010/2011/2012
HS 250h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Removal"
- 2008/2009/2010/2011/2012/2013/2014/2015/2016
LS 600h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Removal"
- 2011/2012/2013/2014
CT 200h:
- Using compressed air and/or a vacuum, remove ALL dust, lint, or debris buildup from the HV battery cooling fan blades and air duct.NOTE: Failure to secure the fan blades while cleaning the HV battery cooling fan assembly may result in electronic circuit failure due to overturning.
- Reinstall the HV battery cooling fan AFTER cleaning it. Refer to TIS, applicable model and model year Repair Manual:
- 2011/2012/2013/2014
CT 200h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Installation"
- ES 300h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Installation"
- 2006/2007/2008
RX 400h:
Engine/Hybrid System - Hybrid/Battery Control System - "P310 Hybrid Battery Control: Battery Blower: Installation"
- 2010/2011/2012/2013/2014/2015
RX 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Installation"
- 2007/2008/2009/2010/2011/2013/2014
GS 450h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid Battery Control: Battery Blower: Installation"
- 2010/2011/2012
HS 250h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid/Battery Control: Battery Blower: Installation"
- 2008/2009/2010/2011/2012/2013/2014/2015/2016
LS 600h:
Engine/Hybrid System - Hybrid/Battery Control System - "Hybrid Battery Control: Battery Blower: Installation"
- 2011/2012/2013/2014
CT 200h:
- Has the HV battery cooling system efficiency improved?
- YES - The procedure is complete. Repeat this cleaning procedure as regular maintenance every 20, 000 miles. If applicable, perform a filter inspection every 5, 000 miles.
- NO - This bulletin does NOT apply. Continue diagnosis using the applicable Repair Manual.