LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2014 >> IS F >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt (Service Information) >> Occupant Detection Sensor >> Installation [09/2013 - ] >> Installation [09/2013 - ]

Installation [09/2013 - ]

  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD 
    1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 16 new hog rings.
      Fig 1: Locating Separate Type Front Seat Cushion Cover With Hog Rings
      GTY360380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Be careful not to damage the cover.
      • When installing the hog rings, avoid wrinkling the cover.
  2. INSTALL FRONT SEAT CUSHION COVER WITH PAD  . Refer to REASSEMBLY [09/2013 - ] - Step 21
  3. INSTALL POWER SEAT SWITCH 

    HINT: 

    Use the same procedure described for the LH side. Refer to REASSEMBLY [09/2013 - ] - Step 22 .

  4. INSTALL FRONT SEAT CUSHION INNER SHIELD 

    HINT: 

    Use the same procedure described for the LH side. Refer to REASSEMBLY [09/2013 - ] - Step 24 .

  5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY 

    HINT: 

    Use the same procedure described for the LH side. Refer to REASSEMBLY [09/2013 - ] - Step 28 .

  6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB 

    HINT: 

    Use the same procedure described for the LH side. Refer to REASSEMBLY [09/2013 - ] - Step 29 .

  7. INSTALL RECLINING POWER SEAT SWITCH KNOB 

    HINT: 

    Use the same procedure described for the LH side. Refer to REASSEMBLY [09/2013 - ] - Step 30 .

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY 

    HINT: 

    Use the same procedure described for the LH side See step  1.

  9. INSTALL FRONT SEAT ASSEMBLY 

    Refer to INSTALLATION [09/2013 - ]

    HINT: 

    Use the same procedure described for the LH side.