LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> LS 600hL >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) >> Tilt And Telescopic Manual Switch >> Installation >> Installation

Tilt And Telescopic Manual Switch: Installation: Installation

  1. INSTALL TILT AND TELESCOPIC MANUAL SWITCH 
    Fig 1: Identifying Tilt And Telescopic Switch Connector With Claw
    GTY123352Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the claw to install the tilt and telescopic manual switch.
    2. Connect the connector.
  2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera) 
    Fig 2: Identifying Steering Column Upper Cover Clips
    GTY110796Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the claw to install the upper steering column cover.
    2. Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.
    3. Fig 3: Identifying Steering Column Lower Cover With Claws
      GTY138702Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the tilt and telescopic switch.

    4. Attach the 2 claws to install the lower steering column cover.
    5. Install the screw.

      Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf) 

    6. Fig 4: Turning Steering Wheel To Right And Left
      GTY139400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. Install the 2 screws.

      Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf) 

      HINT: 

      Turn the steering wheel to the right and left as necessary to install the 2 screws.

  3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera) 
    Fig 5: Identifying Upper Steering Column Cover And Claw Location(s)
    GTY109856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the clip to install the upper steering column cover.
    2. Attach the 4 clips.
    3. Fig 6: Identifying Lower Steering Column Cover And Claw Location(s)
      GTY109855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the tilt and telescopic switch.

    4. Attach the 2 claws to install the lower steering column cover.
    5. Install the screw.

      Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf) 

    6. Fig 7: Turning Steering Wheel To Right And Left
      GTY139400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. Install the 2 screws.

      Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf) 

      HINT: 

      Turn the steering wheel to the right and left as necessary to install the 2 screws.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:
    • Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS .
    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
  5. INSTALL BATTERY SERVICE HOLE COVER LH  . Refer to INSTALLATION - Step 15
  6. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)  . Refer to INSTALLATION - Step 16
  7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  . Refer to INSTALLATION - Step 17
  8. INSPECT SRS WARNING LIGHT 
    1. Inspect the SRS warning light. Refer to DIAGNOSIS SYSTEM .