Typical Enabling Conditions
MANUAL TRANSMISSION MODELS
| Monitor runs whenever following DTCs are not present | None |
| Time after engine switch off to on | 3 seconds or more |
| Engine switch | On (IG) |
| Starter | Off |
| Engine coolant temperature | 70°C (158°F) or more |
| Engine speed | 2000 to 5000 RPM |
| Engine load | 30.15% or more |
| Fuel cut high engine speed | Not operating |
| Engine coolant temperature circuit fail (P0115, P0117, P0118) | Not detected |
| Mass air flow meter circuit fail (P0102, P0103) | Not detected |
AUTOMATIC TRANSMISSION MODELS
| Monitor runs whenever following DTCs are not present | None |
| Time after engine switch off to on | 3 seconds or more |
| Engine | Running |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| Either of the following conditions is met: | Condition 1 or 2 |
| 1. All of the following conditions are met: | Conditions A, B and C |
| A. Engine coolant temperature | 20°C (68°F) or more |
| B. Engine coolant temperature sensor circuit fail (P0115, P0117, P0118, P0125) | Not detected |
| C. Time after park/neutral position switch on to off | 10 seconds or more |
| 2. All of the following conditions are met: | Conditions D and E |
| D. Either of the following condition is met: | Condition (a) or (b) |
| (a) Engine coolant temperature | Less than 20°C (68°F) |
| (b) Engine coolant temperature sensor circuit fail (P0115, P0117, P0118, P0125) | Detected |
| E. Time after park/neutral position switch on to off | 30 seconds or more |