LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> SC 430 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Transmission Wire >> Installation (From 10/2008) >> Installation

Installation (From 10/2008): Installation

  1. INSTALL TRANSMISSION WIRE 
    1. Coat a new O-ring with ATF and install it to the transmission wire.
      Fig 1: Identifying Transmission Wire Harness O-Ring
      GTY106495Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the transmission wire with the bolt.
      Fig 2: Locating Transmission Wire Connector Bolt
      GTY155297Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    3. Connect the transmission wire connector.
  2. CONNECT TRANSMISSION WIRE 
    1. Connect the 9 connectors to the solenoid valves.
      Fig 3: Locating Solenoid Valves Connectors
      GTY104237Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 2 clamps with the 2 bolts.
      Fig 4: Locating Clamps And Bolts
      GTY100391Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 6.4 N*m (65 kgf*cm, 57 in.*lbf) 

      for bolt A

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      for bolt B

    3. Install the ATF temperature sensor and lock plate with the bolt.
      Fig 5: Locating ATF Temperature Sensor Locking Plate Bolt
      GTY106498Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY 
    1. Coat a new O-ring with ATF.
    2. Install the O-ring.
      Fig 6: Identifying Oil Strainer O-Ring
      GTY101294Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the oil strainer with the 4 bolts.
      Fig 7: Locating Oil Strainer Bolts
      GTY102813Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

  4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY 
    1. Install the 3 magnets in the oil pan.
      Fig 8: Identifying Oil Pan Magnet
      GTY126370Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install a new gasket and the oil pan to the transmission case with the 20 bolts.
      Fig 9: Locating Oil Pan Bolts
      GTY103695Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 4.4 N*m (45 kgf*cm, 39 in.*lbf) 

  5. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY 
    Fig 10: Locating Exhaust Pipe Support Bracket Sub-Assembly Bolts
    GTY128170Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the bracket with the 4 bolts and 2 nuts.

      Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf) 

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. ADD AUTOMATIC TRANSMISSION FLUID 
    1. Add automatic transmission fluid. Refer to ADJUSTMENT .
  8. PERFORM INITIALIZATION 
    1. Perform initialization. Refer to INITIALIZATION .
      NOTE:

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.