Drive Belt: Installation: Installation
- INSTALL FAN & GENERATOR V BELT
- Set the V-belt to everything except the No. 2 idler pulley, as shown in the illustration.
- Loosen the V-belt by turning the belt tensioner counterclockwise.
- Then set the V-belt to the idler pulley.
- After a new belt has been installed, check that the mark is within the A range shown in the illustration.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL NO. 1 AIR CLEANER INLET
- Install the air cleaner inlet with the bolt.
Torque: 5.0 N*m ( 51 kgf*cm, 44 in.*lbf)
- Install the air cleaner inlet with the bolt.