Cruise Control Main Switch: Inspection: Inspection
- INSPECT CRUISE CONTROL MAIN SWITCH
- Measure the resistance according to the value(s) in the table below.
Standard Resistance (for Cruise Control System)
Tester Connection Switch Condition Specified Condition 1 (ECC) - 3 (CCS) Main Switch off*1 1 MΩ or higher Main Switch on Below 2.5 Ω + RES 235 to 245 Ω - SET 617 to 643 Ω CANCEL 1509 to 1571 Ω Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance (for Dynamic Radar Cruise Control System)
Tester Connection Switch Condition Specified Condition 1 (ECC) - 3 (CCS)
1 (ECC) - 2 (R/N)Main Switch off*1 1 MΩ or higher 1 (ECC) - 3 (CCS) Main switch on Below 2.5 Ω 1 (ECC) - 2 (R/N) MODE Below 2.5 Ω 1 (ECC) - 3 (CCS) + RES 235 to 245 Ω 1 (ECC) - 3 (CCS) - SET 617 to 643 Ω 1 (ECC) - 3 (CCS) CANCEL 1509 to 1571 Ω *1: Lever is in the neutral position
If the result is not as specified, replace the cruise control main switch
- Measure the resistance according to the value(s) in the table below.