LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 350 AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Rear Center Seat Inner Belt Assembly >> Installation

Rear Center Seat Inner Belt Assembly: Installation

  1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY 
    1. Install the rear center seat inner belt assembly with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      Fig 1: Identifying Bolt & Rear Center Seat Inner Belt Assembly
      G05273534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Tighten the bolt while the claws of the rear center seat inner belt assembly are in contact with the vehicle body.
      • Claw 1 can have a clearance of up to 2.0 mm (0.08 in.) between the claw and the vehicle body.

      HINT:

      Place the buckle of the rear center seat inner belt assembly somewhere on the floor carpet so that the buckle does not interfere with installation of the seat.

  2. INSTALL REAR SEAT ASSEMBLY LH  (See INSTALLATION )
  3. INSTALL REAR SEAT TRACK BRACKET COVER 
  4. INSPECT SLIDE ADJUSTER LOCK  (See INSTALLATION )