Disc Magazine Inserted but No Power
- INSPECT FUSE (ACC, RADIO)
- Remove the ACC fuse from the cowl side junction block LH.
- Remove the RADIO fuse from the cowl side junction block RH.
- Measure the resistance of the fuses.
Standard resistance:
Below 1 Ω
NG: REPLACE FUSE
OK: Go To Next Step
- CHECK WIRE HARNESS (DISC PLAYER CHANGER - BATTERY AND BODY GROUND)
- Disconnect the D32 changer connector.
- Measure the resistance of the wire harness side connector.
Standard resistance
TESTER CONNECTION AND SPECIFIED CONDITION CHARTTester Connection Specified Condition D32-20 (GND) - Body ground Below 1 Ω - Measure the voltage of the wire harness side connector.
Standard voltage
TESTER CONNECTION AND SPECIFIED CONDITION CHARTTester Connection Condition Specified Condition D32-10 (+B) - Body ground Always 10 to 14 V D32-1 (ACC) - Body ground Ignition switch ACC 10 to 14 V NG: REPAIR OR REPLACE HARNESS AND CONNECTOR
OK: REPLACE DISC PLAYER CHANGER