Inspection Procedure
- CHECK HARNESS AND CONNECTOR (CLOCK - MULTI-DISPLAY)
- Disconnect the L38 clock connector.
- Disconnect the L60 display connector.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
CLOCK - MULTI-DISPLAYTester Connection Condition Specified Condition L38-5 (TX1-) - L60-17 (TX3-) Always Below 1 Ω L38-6 (TX1+) - L60-18 (TX3+) Always Below 1 Ω L38-5 (TX1-) - Body ground Always 10 kΩ or higher L38-6 (TX1+) - Body ground Always 10 kΩ or higher
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
OK: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )