LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2005 >> IS 300 Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> SFI >> Fuel Pressure Pulsation Damper >> Removal

Fuel Pressure Pulsation Damper: Removal

  1. REMOVE ENGINE COVER 

    Remove the 4 nuts and engine cover.

  2. DISCONNECT CONNECTOR AND HOSES 
    1. Disconnect the VSV connector for the EVAP.
    2. Disconnect the EVAP hose from the EVAP pipe.
    3. Disconnect the vacuum hose (from No. 2 vacuum pipe) from the air intake chamber.
    Fig 1: Disconnecting Connector And Hoses
    G02949178Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FUEL PRESSURE PULSATION DAMPER 
    1. Remove the nut holding the No.2 vacuum pipe to the intake manifold.
    2. Remove the bolt holding the fuel inlet pipe to the intake manifold.
      Fig 2: Removing Nut Holding No.2 Vacuum Pipe To Intake Manifold And Bolt Holding Fuel Inlet Pipe To Intake Manifold
      G02949179Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using SST, remove the pulsation damper and 2 gaskets.
      1. SST 09612-24014 (09617-24011)
      Fig 3: Using SST To Remove Pulsation Damper And Gaskets
      G02949180Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    CAUTION:
    • Put a shop towel under the delivery pipe.
    • Slowly loosen the pulsation damper.