LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> System >> Engine (3UZ-FE) - Diagnostics >> Circuit Inspection >> DTC P0505: Idle Air Control System >> Inspection Procedure

Inspection Procedure

HINT:

  1. Are there any other codes (besides P0505) being output? 

    PREPARATION: 

    1. Connect the hand-held tester or the OBD II scan tool to the DLC3.
    2. Turn the ignition switch ON and push the hand-held tester or the OBD II scan tool main switch ON.
    3. When using hand-held tester, enter the following menus: DIAGNOSIS / ENHANCED OBD II / DTC INFO/ CURRENT CODES.

    CHECK: 

    Read the DTC using the hand-held tester or the OBD II scan tool.

    RESULT: 

    Fig 1: DTC Output Result Chart
    G01488594Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    HINT:

    If any other codes besides P0505 are output, perform the troubleshooting for those DTCs first.

    1. B: Go to relevant DTC chart (See  DIAGNOSTIC TROUBLE CODE CHART  ).  
    2. A: Go to Next Step 
  2. Check connection of PCV piping. 
    1. NG: Repair or replace PCV piping. 
    2. OK: Go to next step 
  3. Check air induction system (See  SFI SYSTEM  ).  

    CHECK: 

    Check for vacuum leaks in air induction system.

    1. NG: Repair or replace air induction system. 
    2. OK: Go to next step 

      Check electric throttle control system (See  ON-VEHICLE INSPECTION  ).