LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> System >> Engine (3UZ-FE) - Diagnostics >> Circuit Inspection >> DTC P0101: Mass or Volume Air Flow Circuit Range/Performance Problem >> Inspection Procedure

Inspection Procedure

NOTE: Read freeze frame data using the hand-held tester or the OBD II scan tool. Freeze frame data records engine conditions when a malfunction is detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, as well as other data from the time when a malfunction occurred.
  1. Are there any other codes (besides DTC P0101) being output? 

    PREPARATION: 

    1. Connect the hand-held tester or the OBD II scan tool to the DLC3.
    2. Turn the ignition switch ON and push the hand-held tester or the OBD II scan tool main switch ON.
    3. When using hand-held tester, enter the following menus: DIAGNOSIS/ENHANCED OBD II/DTC INFO/CURRENT CODES.

    CHECK: 

    Read the DTCs.

    RESULT: 

    Fig 1: Display Result Chart
    G01488321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE: If any other codes besides P0101 are output, perform the troubleshooting for those DTCs first.
    1. B: Replace mass air flow meter. 
    2. A: Go to next Step. 

      Go to relevant DTC chart (See  DIAGNOSTIC TROUBLE CODE CHART  ).