LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> GS 300 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Removal & Installation >> Shock Absorber With Coil Spring >> Disassembly

Shock Absorber With Coil Spring: Disassembly

  1. Using Special Tool 09727-30021, compress the coil spring. Do NOT use an impact wrench as it will damage special tool. See Fig 1. Remove piston rod lock nut. Remove suspension support sub-assembly, spring bumper and coil spring.
  2. Compress and extend shock absorber and check that there is no abnormal resistance or unusual sounds. If there is any abnormality, replace shock absorber with a new one.
  3. CAUTION: Gas coming out is harmless. Be careful of chips which may fly up when drilling.
  4. If disposing of old shock absorber, fully extend shock absorber rod. Place shock absorber horizontally to prevent oil from coming out. Using a drill, make a hole on top of shell to discharge gas inside. See Fig 2.
Fig 1: Removing Coil Spring
G00224621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Disposing Of Old Shock Absorber
G00224622Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002