LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> GS 300 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Removal & Installation >> Shock Absorber With Coil Spring >> Assembly

Shock Absorber With Coil Spring: Assembly

  1. Install spring bumper to suspension support. Match bolt of suspension support with cut-out part of spring bumper. See Fig 1.
  2. Using Special Tool 09727-30021, compress coil spring. Do NOT use an impact wrench as it will damage the special tool. See Fig 2. Install coil spring to shock absorber. Fit lower end of coil spring into recess of spring seat of shock absorber.
  3. Install suspension support sub-assembly to rod. Temporarily tighten a NEW lock nut. Align suspension support with shock absorber lower bolt. See Fig 3.
  4. Remove special tool. Recheck direction of suspension support.
Fig 1: Installing Spring Bumper To Suspension Support
G00224623Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Installing Coil Spring To Shock Absorber
G00224624Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Aligning Suspension Support
G00224625Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002