LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> SC 430 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Communication System >> Microphone ASSY (2003 My) >> Replacement

Microphone ASSY (2003 My): Replacement

  1. REMOVE MAP LAMP ASSY 
    1. Using a screwdriver, remove the 2 courtesy lenses.

      HINT:

      Tape the screwdriver tip before use.

    2. Remove the 2 screws.
    3. Disconnect the connector and then remove the map lamp assembly.
    Fig 1: Removing Map Lamp Assy Screws
    G01321086Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE MICROPHONE ASSY 
    1. Cut the tapes as shown in the illustration.
      Fig 2: Identifying Tape To Be Cut
      G01321087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the screw and microphone bracket.
    3. Remove the microphone part.
      Fig 3: Removing Screw And Microphone Bracket
      G01321088Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Using a screwdriver, pull out the retainer from the map lamp connector.
    5. Remove the 2 terminals of the microphone assembly, and remove the microphone assembly from the map lamp connector.
      Fig 4: Removing 2 Terminals Of Microphone Assembly
      G01321089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL MICROPHONE ASSY 
    1. Install the 2 terminals of the microphone assembly to the map lamp connector.
    2. Push the retainer into the map lamp connector.
      Fig 5: Installing 2 Terminals Of Microphone Assembly To Map Lamp Connector
      G01321090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the microphone assembly with the screw and microphone bracket.
      Fig 6: Installing Microphone Assembly With Screw And Microphone Bracket
      G01321091Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Align the microphone cord with the wire harness of the map lamp from the connector side and fix the cord with tapes in one place.
    5. Cover the microphone cord together with the wire harness with tube and fix the tube with tape in one place.
    6. Fix the excessive cord of the microphone in one place.
    Fig 7: Fixing Excessive Cord Of Microphone In One Place
    G01321092Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002