LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> SC 430 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Communication System >> Mayday Switch ASSY (2003 My) >> Replacement

Mayday Switch ASSY (2003 My): Replacement

  1. REMOVE BOX PANEL NO.3 
    1. Using a screwdriver, remove the box panel No.3.

    HINT:

    Tape the screwdriver tip before use.

    Fig 1: Removing Box Panel No. 3
    G01321100Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE MOBILE PHONE BRACKET 
    1. Disconnect the connector.
      Fig 2: Disconnecting Connector
      G01321101Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the console box carpet.
    3. Remove the lower console box cover.
    4. Pull the mobile phone bracket in the arrow mark directions shown in the illustration and remove it.
      Fig 3: Removing Lower Console Box Cover
      G01321102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the tape that is attached to the wire harness of the mayday switch assembly.
    NOTE: Carefully remove the tape.
    Fig 4: Removing Tape That Is Attached To Wire Harness
    G01321103Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE MAYDAY SWITCH ASSY 
    1. Remove the 6 screws and console box rear.
      Fig 5: Removing Mayday Switch Assy Screws
      G01321104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the tape that Is attached to the wire harness of the mayday switch assembly.
      NOTE: Carefully remove the tape.
      Fig 6: Identifying Tape That Is Attached To Wire Harness
      G01321105Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 6 screws and telephone switch assembly.
    Fig 7: Removing Telephone Switch Assembly Screws
    G01321106Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL MAYDAY SWITCH ASSY 
    1. Pass the connector of the mayday switch assembly through the hole of the box door.
    2. Install the mayday switch assembly with the 6 screws.
      Fig 8: Installing Mayday Switch Assembly With 6 Screws
      G01321107Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the wire harness of the mayday switch assembly and fix it with tape as shown in the illustration.
      Fig 9: Installing Wire Harness Of Mayday Switch Assembly And Fix It With Tape
      G01321108Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the console box rear with the 6 screws.
    Fig 10: Installing Console Box Rear With 6 Screws
    G01321109Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL MOBILE PHONE BRACKET 
    1. Install the wire harness of the mayday switch assembly to the mobile phone bracket and fix it with tape, as shown in the illustration.
    2. Install the mobile phone bracket.
    3. Install the lower console box cover.
    4. Install the console box carpet.
      Fig 11: Installing Wire Harness And Fix With Tape
      G01321110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Connect the connector.
  6. INSTALL BOX PANEL NO.3 
    Fig 12: Connecting Connector
    G01321111Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSPECT MAYDAY SWITCH ASSY 
    1. Check that the wire harness of the mayday switch assembly moves smoothly.
    Fig 13: Checking That Wire Harness Of Mayday Switch Assembly Moves Smoothly
    G01321112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002