LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> ES 300 V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Fluid Level Sensor/Switch >> Testing and Inspection

Brake Fluid Level Sensor/Switch: Testing and Inspection

INSPECT BRAKE FLUID LEVEL WARNING SWITCH
a. Inspect the continuity.
1. Remove the reservoir tank cap and strainer.
2. Disconnect the connector.
3. Check that the continuity exists between the terminals.

Float up (switch off): No continuity

4. Use syphon, etc., to take fluid out of the reservoir tank.
5. Check that the continuity exists between the terminals.

Float down (switch on): Continuity

6. Pour the fluid back in the reservoir tank.