Garage Door Opener System: Inspection
- INSPECT GARAGE DOOR OPENER
- Press the switch and check that each LED (red) lights up. Even if only one switch is found not light up, replace it.
- INSPECT GARAGE DOOR OPENER REGISTRATION AND TRANSMITTING
HINT:
Use the home link tester made by KENT MORE for this test. As it is necessary to record the code of the hand-held transmitter, erase the customer's code. When the inspection completes, please register the customer's code again.
- Check that the code of hand-held transmitter for inspection can be recorded.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HINT:
If the code can not be registered, replace garage door opener.
- Press the switch which an inspection code has been registered for and check that LED (green) of the home link tester lights up.
HINT:
If the LED (green) does not light up, replace the garage door opener.
- Check that the code of hand-held transmitter for inspection can be recorded.