BRAKELIGHT Switch Circuit
CAUTION:
If ECU replacement is necessary during testing, always ensure ECU connectors and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECU malfunction.
- Ensure brakelights operate when brake pedal is depressed. Disconnect brakelight connector and remove brakelight switch. Using an ohmmeter, check for continuity between brakelight switch terminals. Continuity should exist between terminals No. 1 and 2. See Fig 1. Depress brakelight switch button. Continuity should exist betwe en terminals No. 3 and 4. See Fig 1. Replace switch as necessary. If brakelight switch is okay, go to next step.
- Using voltmeter, measure voltage between ground and brakelight switch connector terminal No. 2 (White wire). If battery voltage exists, brakelight switch circuit is okay. If battery voltage is not present, inspect and repair circuit between brakelight switch, power source and ABS/TRAC ECU. If circuit is okay, replace ABS/TRAC ECU.