LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1992 >> SC 400 >> Repair and Diagnosis >> Suspension >> Front Suspension >> Removal & Installation >> Strut Assembly >> Installation (LS400)

Installation (LS400)

  1. Install upper support, leaving NEW nut loose. Install upper support so hole in mounting eye is 90 degrees to line drawn through mounting bolt and center bolt. See Fig 1. To complete installation, reverse removal procedure.
  2. Bounce vehicle several times to stabilize suspension before tightening lower strut mounting nut. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS (LS400) table at end of article. Check wheel alignment. See SPECIFICATIONS & PROCEDURES article in the WHEEL ALIGNMENT Section.
    Fig 1: Aligning Strut Mounting Eye (Except ES300)
    G93F02351Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002