LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1992 >> SC 400 >> Repair and Diagnosis >> Suspension >> Front Suspension >> Removal & Installation >> Strut Assembly >> Installation (ES300)

Installation (ES300)

Install spring so end seats properly in spring seat notch. Install upper support, using NEW nut. Rotate upper support so lowest bolt on upper support aligns with projection on lower spring seat. See Fig 1. To complete installation, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS (ES300) table at end of article. Check wheel alignment. See SPECIFICATIONS & PROCEDURES article in the WHEEL ALIGNMENT Section.

Fig 1: Aligning Upper Support (ES300)
G93D02350Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002