LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1992 >> ES 300 Standard >> Repair and Diagnosis >> Transmission >> Clutches >> Removal & Installation >> Clutch Assembly >> Inspection

Clutch Assembly: Inspection

  1. Inspect clutch disc for wear, damage or contamination. Ensure minimum rivet depth is at least .012" (.3 mm). Ensure maximum clutch disc runout is .031" (.8 mm) or less. See Fig 1. Replace disc if values are not as specified.
  2. Measure diaphragm for depth and width wear. See Fig 2. Maximum depth is .024" (.6 mm) and maximum width is .197" (5.0 mm). Replace as necessary.
  3. With dial indicator, inspect flywheel runout. If runout exceeds .004" (.1 mm), replace flywheel. See Fig 3. Turn release bearing by hand while applying axial force. See Fig 4. If a problem is found, replace bearing assembly.
NOTE: Bearing is permanently lubricated and requires no cleaning or lubrication.
Fig 1: Measuring Clutch Disc Rivet Depth & Wear
G91A02985Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Measuring Diaphragm Depth & Width Wear
G91C02986Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Inspecting Flywheel For Runout
G91E02987Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 4: Checking Release Bearing Operation
G91G02988Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002