LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2011 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Seating) >> Seating >> Removal And Installation >> Front Seat Tilt Motor >> Installation

Front Seat Tilt Motor: Installation

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat module bracket.
    • Tighten the Torx bolts to 10 Nm (7 lb.ft).
  2. Install the front seat tilt motor assembly.
    • Tighten the 4 Torx bolts to 10 Nm (7 lb.ft).
    • Connect the electrical connectors.
  3. Install the front seat cushion assembly. See Front Seat Cushion .
  4. Install the front seat cushion side finisher.
    • Secure in the clips.
    • Tighten the screws.
  5. Install the front seat control switch.
    • Secure in the clips.
    • Tighten the screws.
  6. Install the front seat. See Front Seat .
scientia non olet · About LEMON Manuals