LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2011 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Seating) >> Seating >> Removal And Installation >> Front Seat Height Adjustment Motor >> Installation

Front Seat Height Adjustment Motor: Installation

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat height adjustment motor.
    • Tighten the nuts to 25 Nm (18 lb.ft).
    • Connect the electrical connector.
  2. Install the front seat position sensor.
    • Tighten the nuts to 4 Nm (3 lb.ft).
  3. Install the front seat tilt motor.
    • Tighten the Torx bolts to 10 Nm (7 lb.ft).
    • Attach the wiring harness.
  4. Install the front seat electrical connector bracket.
    • Tighten the screws.
  5. Install the front seat backrest assembly.
    • Tighten the Torx bolts to 25 Nm (18 lb.ft).
    • Connect and secure the electrical connectors.
  6. Install the front seat cushion assembly. See Front Seat Cushion .
  7. Install the front safety belt buckle. Refer to Front Safety Belt Buckle article.
scientia non olet · About LEMON Manuals