LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2005 >> Freelander SE3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Suspension - Front) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2004 Land Rover Freelander, 2003 Land Rover Freelander, and 2002 Land Rover Freelander. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Anti-Roll Bar-To-Link Nut 41 (55)
Anti-Roll Bar Link-To-Damper Nut 33 (45)
Anti-Roll Bar Saddle Clamp-To-Subframe Bolts 17 (23)
Ball Joint-To-Steering Arm Nuts 41 (55)
Ball Joint Stud Nut 51 (69)
Brake Caliper-To-Hub Bolt 74 (100)
Cartridge Closure Nut 145 (197)
Damper Assembly-To-Body Top Mounting Nuts (1) 33 (45)
Damper-To-Hub Nuts & Bolts (1) 151 (205)
Damper Shaft Locking Nut (2) 42 (57)
Engine Lower Steady-To-Support Beam Bolt 74 (100)
Engine Tie Bar-To-Sump Bolts 74 (100)
Front Subframe-To-Body Front Bolts 140 (190)
Hub Drive Shaft Nut (2) 295 (400)
Hub Assembly-To-Lower Swivel Joint Nut 48 (65)
Lower Arm Front Bushing-To-Subframe Bolt (1) 140 (190)
Lower Arm Rear Bushing Housing Bolts-To-Body (1) 77 (105)
Lower Arm-To-Rear Bushing Housing Nut (1) 103 (140)
Road Wheel Nuts (3) 85 (115)
Support Beam-To-Body Bolts 140 (190)
Underbelly Panel Frame 33 (45)
INCH Lbs. (N.m) 
Brake Disc Shield Bolts 80 (9)
Brake Disc-To-Drive Flange 44 (5)
Engine Compartment Fusebox 71 (8)
Rear Underbelly Panel Bolts 71 (8)
(1) Tighten with weight of vehicle on suspension.
(2) Use NEW nuts.
(3) Tighten in diagonal sequence.