70.40.09 Brake Shoes - Rear Set: Refit
- Position adjuster and expander to brake shoes and fit return springs.
- Smear brake shoe contact points with Molykote 111 grease.
- Remove elastic band from wheel cylinder.
- Maneuver brake shoes around rear hub and locate to abutment and wheel cylinder.
- Fit brake shoe retaining pins and secure with clips.
- Connect hand brake cable to brake shoe lever.
- Fit brake drum.
Refer to DRUM - REAR .
- Apply brake pedal a min. of 30 times to ensure full adjustment of rear brake shoes after refitting.
- Fit road wheel(s) and tighten nuts to 115 Nm (85 lbf.ft).
- Remove stands and lower vehicle.