LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2005 >> Freelander SE >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Jacking & Hoisting >> Jacking >> Raising Rear Of Vehicle

Raising Rear Of Vehicle

  1. Position cup of hydraulic arm under the center of the rear subframe crossmember at the position identified by the embossed arrows. See Figure .
  2. Use jack to raise rear road wheels to enable safety stands to be installed under the rear ends of the body longitudinal members. See Figure .
  3. Carefully lower jack until vehicle sits securely on safety stands.
  4. Before working on the underside of a vehicle, recheck the stability of the vehicle on the stands.
  5. Use the reverse procedure when removing a vehicle from stands.