SLABS HDC warning
The BCU issues an audible warning No. 3 request, depending on the status of the following inputs:
- Ignition state.
- SLABS HDC warning.
The SLABS warning transmitted by the SLABS ECU is a 2 Hz signal, audible warning No. 3 is requested on every falling edge of this signal. If the signal from the SLABS ECU stays low for more than 650 ms, audible warning No. 3 is requested every 2 seconds, for 30 seconds, while the signal stays low.
In the event of a communications link failure occurring, the audible warning request is not sent to the instrument pack.