LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2003 >> Range Rover >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Operation >> Emergency Brake Assist (EBA)

Emergency Brake Assist (EBA)

The EBA is designed to enhance the braking control of the DSC for the driver of the vehicle. The EBA includes two functions that are programmed into the control electronics of the ABS ECU with no additional hardware changes.

The first EBA function is designed to provide the maximum braking force available during rapid (panic) braking situations. The ABS control module looks at the inputs from the brake pedal switch and the signal from the brake pressure sensor on the master cylinder. The criteria for activation of EBA is the speed at which brake pressure builds up with the brake pedal depressed. The total criteria required for EBA activation includes:

If the threshold for EBA activation is achieved, the ABS control module will activate a pressure build up regulation phase through the hydraulic unit. The pressure at all wheels is increased up to the ABS operation point. This occurs even if the driver does not achieve the ABS operation point with the pedal.

The front and rear axle brakes are controlled individually. ABS operation will continue until the driver releases the pedal and the pressure in the master cylinder drops below the threshold value stored in the ABS ECU.

The second EBA function is also designed to enhance a driver initiated braking procedure. The EBA will build up the pressure in the rear brake circuit when the front brakes are already in an ABS regulation cycle. The additional braking pressure at the rear wheels will shorten the stopping distance. The following criteria must be met before the ABS control module will activate EBA:

EBA sensitivity can be adjusted using T4. There are three sensitivity settings, default is the most sensitive.