LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2003 >> Freelander SE >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Removal & Installation >> Steering Wheel >> Removal

Steering Wheel: Removal

  1. Remove driver side airbag module from steering wheel:
  2. Disconnect multiplug from rotary coupler. See Fig 1.
  3. Fig 1: Removing Steering Wheel
    G00386417Courtesy of LAND ROVER NORTH AMERICA, INC.
  4. Centralize steering wheel with road wheels in straight ahead position.
  5. Restrain steering wheel and loosen self locking nut securing steering wheel to column.
  6. Pull steering wheel from column splines.
  7. Remove and discard self-locking nut.
  8. Remove steering wheel.
  9. Attach tape across edge of rotary coupler to retain correct setting. See Fig 2.
  10. Fig 2: Attaching Tape Across Rotary Coupler
    G00386418Courtesy of LAND ROVER NORTH AMERICA, INC.
  11. On Td4 models: Remove 3 screws securing damper and remove damper. See Fig 3.
  12. Fig 3: Removing Steering Wheel Damper (Td4)
    G00386419Courtesy of LAND ROVER NORTH AMERICA, INC.
  13. Using a broad round edged tool, carefully pry horn switches from steering wheel. See Fig 4.
  14. Fig 4: Removing Steering Wheel Horn Switches
    G00386420Courtesy of LAND ROVER NORTH AMERICA, INC.
  15. Noting fitted position, disconnect 2 Lucars and remove horn switch.
  16. Repeat for other horn switch.
  17. Disconnect multiplugs from cruise control (if fitted) and radio control switches. See Fig 5.
  18. Fig 5: Disconnecting Steering Wheel Switches
    G00386421Courtesy of LAND ROVER NORTH AMERICA, INC.
  19. Release harness from clips and remove harness.
  20. On models with cruise control: Remove 2 screws securing cruise control switches to steering wheel.
  21. On models with cruise control: Remove cruise control switches from steering wheel.
  22. Remove 2 screws securing radio switches to steering wheel.
  23. Remove radio switches from steering wheel.