Column Lock & Ignition/Starter Switch Assembly: Removal
- Disconnect battery earth lead.
- Remove starter key from ignition lock.
- Remove steering column nacelle. See NACELLE - COLUMN .
- Disconnect multiplugs from ignition switch and passive coil. See Fig 1.
Courtesy of LAND ROVER NORTH AMERICA, INC.
- Remove passive coil. See Fig 2.
Courtesy of LAND ROVER NORTH AMERICA, INC.
- Remove 2 screws and remove ignition switch.
- Move rubber column cover aside to access column lock bolts.
- Mark both column lock bolts using a center punch.
- Drill out both column lock bolts.
- Remove column lock saddle and remove column lock.
- On models with automatic transmission: Loosen union and release key interlock cable from column lock. See Fig 3.
Courtesy of LAND ROVER NORTH AMERICA, INC.