Power Assisted Steering (Pas) System - Bleed: Adjust
- Clean PAS fluid reservoir around filler cap and fluid level indicators.
- Remove filler cap from reservoir and fill reservoir to UPPER mark with Dexron II D power steering fluid. Fluid must always be present in reservoir while bleeding.
- Start engine and allow to run at idle for 10 seconds. Stop engine.
- Top-up steering fluid reservoir.
- Start engine and turn steering fully to LH and RH locks. Stop engine.CAUTION: DO NOT hold steering at full lock for longer than 10 seconds.
- Top-up steering fluid reservoir.
- Start and run engine for 2 minutes, turn steering fully to RH and LH locks.