DTC P1663-P1665: Throttle Angle/Torque Signal Circuit Malfunction: Description
The ECM transmits throttle angle, engine torque, engine identification, and transmission type data to the SLABS ECU to support the Hill Descent Control (HDC) system. The data is transmitted via a 0-12 volt PWM signal at a frequency of 179.27 Hz.
HDC signal output is from ECM 52-pin connector C0636 terminal No. 29 (Gray/Purple wire). The ECM generates a PWM signal that varies in pulse width in accordance with changing throttle angle or engine torque. The throttle angle data is transmitted on pulses 1, 3, 5 and 37. The engine torque data is transmitted on pulses 2, 4, 6 and 38. The type of engine and transmission information is transmitted on pulse 39. A synchronizing pulse is transmitted after every 39th pulse.