LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1997 >> Defender 90 (LD) V8-4.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> System Relay >> Service and Repair >> Fan Interlock Relay

Fan Interlock Relay

Remove





1. Lever under each bottom corner and extract cold air vents from bezel, 1 from LH side and 2 from RH side.
2. Remove screw securing underside of bezel to panel.
3. Remove 3 screws securing inside of bezel to panel.





4. Lift bezel away from evaporator casing.
5. Withdraw capillary tube from evaporator fins.
6. Disconnect multiplug from fan interlock relay.
7. Remove securing screw and remove relay from rear of bezel.

Refit
8. Fit screw and secure relay to rear of bezel.
9. Connect multiplug to fan interlock relay.
10. Position bezel assembly and insert capillary tube 60 mm, 2.5 in into evaporator tins.
11. Fit bezel assembly to panel and above evaporator casing, secure with screws.
12. Fit cold air vents.
13. Carry out system test. Refer to: Testing and Inspection.