Repair Procedures: Replacement
- Remove the ATF drain plug (A), allow the fluid to drain out and then reinstall the drain plug.
Tightening torque:
22.6 - 24.5 N.m (2.3 - 2.5 kgf.m, 16.6 - 18.1 lb.ft)
NOTE: The existing ATF drain plug O-ring must be replaced with a new one (do not reuse). - Fill the automatic transmission with about 7.0 l of ATF SP-IV-RR through the ATF filler hole.
- Perform the ATF level check procedure.
(Refer to Fluid - "AUTOMATIC TRANSMISSION FLUID (ATF) LEVEL CHECK ")