LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Stinger GT-Line, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Timing System - 3.3L) >> Timing Chain >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the cylinder head cover.

    (Refer to Cylinder Head Assembly - "CYLINDER HEAD COVER ")

  2. Set No. 1 cylinder to TDC/compression.
    1. Turn the crankshaft pulley clockwise and align its groove with the timing mark "T" of the lower timing chain cover.
      G14999555Courtesy of KIA MOTORS AMERICA, INC.
    2. Check that the mark of the camshaft timing sprockets are in straight line on the cylinder head surface as shown in the illustration. If not, turn the crankshaft clockwise one revolution (360°).

      [RH] 

      G14999556Courtesy of KIA MOTORS AMERICA, INC.

      [LH] 

      G14999557Courtesy of KIA MOTORS AMERICA, INC.
      NOTE: Do not rotate engine counterclockwise.
  3. Remove the timing chain cover.

    (Refer to Timing System - "TIMING CHAIN COVER ")

    NOTE: Before removing the timing chain, mark the RH/LH timing chain with an identification based on the location of the sprocket because the identification mark on the chain for TDC (Top Dead Center) can be erased.
    G14999558Courtesy of KIA MOTORS AMERICA, INC.
    G14999559Courtesy of KIA MOTORS AMERICA, INC.
    G14999560Courtesy of KIA MOTORS AMERICA, INC.
    G14999561Courtesy of KIA MOTORS AMERICA, INC.
  4. Release the ratchet by pulling the link down using a thin rod. Compress the piston and then insert a stopper pin (A) into the hole on the ratchet to hold the compressed piston.
  5. Remove the RH timing chain tensioner (B).
    G14999562Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the RH timing chain tensioner adapter (A).
    G14999563Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the RH timing chain tensioner arm (A).
    G14999564Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the RH timing chain (A).
    G14999565Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the RH timing chain guide (A).
    G14999566Courtesy of KIA MOTORS AMERICA, INC.
  10. Remove the RH timing chain cam to cam guide (A).
    G14999567Courtesy of KIA MOTORS AMERICA, INC.
  11. Remove the crankshaft RH timing chain sprocket (A).
    G14999568Courtesy of KIA MOTORS AMERICA, INC.
  12. Remove the oil pump chain tensioner (A).
    G14999569Courtesy of KIA MOTORS AMERICA, INC.
  13. Remove the oil pump chain sprocket (A) and oil pump chain (B).
    G14999570Courtesy of KIA MOTORS AMERICA, INC.
  14. Remove the crankshaft oil pump sprocket (A).
    G14999571Courtesy of KIA MOTORS AMERICA, INC.
  15. Release the ratchet by pulling the link down using a thin rod. Compress the piston and then insert a stopper pin (A) into the hole on the ratchet to hold the compressed piston.
  16. Remove the LH timing chain tensioner (B).
    G14999572Courtesy of KIA MOTORS AMERICA, INC.
  17. Remove the LH timing chain tensioner adapter (A).
    G14999573Courtesy of KIA MOTORS AMERICA, INC.
  18. Remove the LH timing chain tensioner arm (A).
    G14999574Courtesy of KIA MOTORS AMERICA, INC.
  19. Remove the crankshaft LH timing chain sprocket (A) and LH timing chain (B).
    G14999575Courtesy of KIA MOTORS AMERICA, INC.
  20. Remove the LH timing chain guide (A).
    G14999576Courtesy of KIA MOTORS AMERICA, INC.
  21. Remove the LH timing chain cam to cam guide (A).
    G14999577Courtesy of KIA MOTORS AMERICA, INC.