LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Stinger GT-Line, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Timing System - 3.3L) >> Timing Chain >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. The key (A) of crankshaft should be aligned with the timing mark (B) of block. As a result of this, the piston of No. 1 cylinder is placed at the top dead center on compression stroke.
    G14999578Courtesy of KIA MOTORS AMERICA, INC.
  2. Align the mark of the exhaust camshaft sprocket and intake CVVT on the top surface of cylinder head. As a result of this, the piston of No. 1 cylinder is placed at the top dead center on compression stroke.

    [LH] 

    G14999579Courtesy of KIA MOTORS AMERICA, INC.

    [RH] 

    G14999580Courtesy of KIA MOTORS AMERICA, INC.
  3. Install the LH timing chain cam to cam guide (A).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14999581Courtesy of KIA MOTORS AMERICA, INC.
  4. Install the LH timing chain guide (A).

    Tightening torque: 

    19.6 - 24.5 N.m (2.0 - 2.5 kgf.m, 14.5 - 18.1 lb.ft)

    G14999582Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the crankshaft LH timing chain sprocket (A) and LH timing chain (B).
    G14999583Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • To install the timing chain with no slack between each shaft (cam, crank), follow the procedure below:

      Crankshaft sprocket → Timing chain guide → Exhaust CVVT sprocket → Intake CVVT sprocket.

    • When installing the timing chain, be sure that the timing mark of each sprocket is matched with the timing mark (color link) of the timing chain.
      G14999584Courtesy of KIA MOTORS AMERICA, INC.
      G14999585Courtesy of KIA MOTORS AMERICA, INC.
  6. Install the LH timing chain tensioner arm (A).
    G14999586Courtesy of KIA MOTORS AMERICA, INC.
  7. Install the LH timing chain tensioner adapter (A).
    G14999587Courtesy of KIA MOTORS AMERICA, INC.
  8. Install the LH timing chain tensioner (A) and then remove the stopper pin (B).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14999588Courtesy of KIA MOTORS AMERICA, INC.
  9. Install the crankshaft oil pump sprocket (A).
    G14999589Courtesy of KIA MOTORS AMERICA, INC.
  10. Install the oil pump chain sprocket (A) and oil pump chain (B).

    Tightening torque: 

    19.6 - 24.5 N.m (2.0 - 2.5 kgf.m, 14.5 - 18.1 lb.ft)

    G14999590Courtesy of KIA MOTORS AMERICA, INC.
  11. Install the oil pump chain tensioner (A).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14999591Courtesy of KIA MOTORS AMERICA, INC.
  12. Install the crankshaft RH timing chain sprocket (A).
    G14999592Courtesy of KIA MOTORS AMERICA, INC.
  13. Install the RH timing chain cam to cam guide (A).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14999593Courtesy of KIA MOTORS AMERICA, INC.
  14. Remove the RH timing chain guide (A).

    Tightening torque 

    19.6 - 24.5 N.m (2.0 - 2.5 kgf.m, 14.5 - 18.1 lb.ft)

    G14999594Courtesy of KIA MOTORS AMERICA, INC.
  15. Install the RH timing chain (A).
    G14999595Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • To install the timing chain with no slack between each shaft (cam, crank), follow the procedure below:

      Crankshaft sprocket → Timing chain guide → Exhaust CVVT sprocket → Intake CVVT sprocket.

    • When installing the timing chain, be sure that the timing mark of each sprocket is matched with the timing mark (color link) of the timing chain.
      G14999596Courtesy of KIA MOTORS AMERICA, INC.
      G14999597Courtesy of KIA MOTORS AMERICA, INC.
  16. Install the RH timing chain tensioner arm (A).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14999598Courtesy of KIA MOTORS AMERICA, INC.
  17. Install the RH timing chain tensioner adapter (A).
    G14999599Courtesy of KIA MOTORS AMERICA, INC.
  18. Install the RH timing chain tensioner (A) and then remove the stopper pin (B).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14999600Courtesy of KIA MOTORS AMERICA, INC.
  19. After rotating the crankshaft 2 revolutions in regular direction (clockwise viewed from front), confirm the timing mark.
    NOTE:
    • Always turn the crankshaft clockwise.
    • Turning the crankshaft counterclockwise before building up oil pressure in the hydraulic timing chain tensioner may result in the chain disengagement from the sprocket teeth.
  20. Install the other parts in the reverse order of removal.